Specifications
Description: The revolutionary Cooper Bussmann® CCP is 1/3 the footprint of a circuit breaker. The level of protection provided by the CCP is up to three times the Short-Circuit Current Rating (SCCR) at full voltage than a molded case circuit breaker while providing disconnecting means.
Ratings:
• Box Lug Connection: 18-6AWG single or dual rated, solid or stranded – 75ºC or higher - Cu only, 4AWG single – 75ºC or higher - Cu only
• Spade Terminal Connection: Max 30A suitable for use with #8-32UNC screw
• Box Lug and Spade Terminal suitable for line, load or accessory connection
• Torque: 18-10AWG 20 lb-in; 8-4AWG 35 lb-in
• Lock-out/tag-out: 4mm shank lock or standard pin-out devices
• 35mm DIN Rail Mount
• Local indication minimum operating voltage: 90Vac for AC version; 12Vdc for DC version
Agency Information:
• For Class CC fuse version
UL 98 Listed, File E302370, Guide WHTY; cULus to CSA Standard 22.2 No. 4-04, File 302370, Guide WHTY7; CE Compliant
• For UL Midget and 10X38 IEC fuse version
UL 508 Listed, File E161278, Guide 8R29; cULus Certified 22.2 No. 14-05; IEC 60947-3 AC23A; IEC 60947-3 DC23A; CE Compliant
Features and Benefits:
• Extremely compact design at 17.5mm wide per pole
• High Short-Circuit Current Ratings up to 200kA
• Disconnect Rated to provide means for load isolation
• Full Voltage Rated 600Vac or 80Vdc
• UL 98 disconnect rated for protection of branch circuits with Low-Peak® CUBEFuse and Class CC fuses.
• Suitable for Global Installations, the units Complies with UL, CSA, and IEC standards accepting UL Class CC, Class CF Low-Peak CUBEFuse with Class J performance, Midget or IEC aM and gG fuses
• Horsepower rated for protecting motor circuits with CUBEFuse and Class CC units.
• Open Fuse Indication
Local fuse indication lights* are standard
Optional wired remote open fuse indication can be utilized to signal a PLC and open a contactor to de-energize all phases, if required.
• IP20 finger-safe construction with 10AWG wire or larger
• Built-in switch interlock capability prohibits removing the fuse under load
• Padlockable handle for lock-out/tag-out procedures
• Available in 1-, 2- and 3-pole versions
*Circuit must be closed for indication light to illuminate
Environmental Data:
• RoHS Compliant: Yes
• Storage and Operating Temperature: -20ºC to 75ºC**
• CE Compliant: Yes
**For fuse performance under or above 25ºC, consult fuse performance
derating charts in the Cooper Bussmann publication titled Selecting
Protective Devices (SPD) reorder #3002.
Technical Ratings
Catalog Number | Poles | Amp Rating | Voltage Rating | Fuse Type | Max.Fuse Ampacity | SCCR | Agency Approvals | Hp Ratings |
CCP-1-30CC | 1 | 30 | 600Vac | Class CC | 30A | 200kA | UL 98 Listed cULus 22.2 No.4-04 | 0.5Hp@120V |
CCP-2-30CC | 2 | 30 | 600Vac | Class CC | 30A | 200kA | UL 98 Listed cULus 22.2 No.4-04 | 2.0Hp@240V |
CCP-3-30CC | 3 | 30 | 600Vac | Class CC | 30A | 200kA | UL 98 Listed cULus 22.2 No.4-04 | 3Hp@240V 5Hp@480V 7.5Hp@600V |
CCP-1-30M | 1 | 30 | 240Vac* UL | UL Midget | 30A | 10kA* | UL 508 Listed cULus 22.2 No.14-05 | |
400Vac* IEC | 10x38 IEC | 32A aM,25A gG | 120kA* | IEC 60947-3 AC23A | ||||
CCP-2-30M | 2 | 30 | 240Vac* UL | UL Midget | 30A | 10kA* | UL 508 Listed cULus 22.2 No.14-05 | |
400Vac* IEC | 10x38 IEC | 32A aM,25A gG | 120kA* | IEC 60947-3 AC23A | ||||
CCP-3-30M | 3 | 30 | 240Vac* UL | UL Midget | 30A | 10kA* | UL 508 Listed cULus 22.2 No.14-05 | |
400Vac* IEC | 10x38 IEC | 32A aM,25A gG | 120kA* | IEC 60947-3 AC23A | ||||
CCP-1-DCC | 1 | 30 | 80V dc* | Class CC(DC rated) | 30A | 20kA* | UL 98 Listed CSA 22.2 No.4-04 | |
CCP-1-DCM | 1 | 30 | 80V dc* | UL Midget | 30A | 10kA* | UL 508 Listed cULus 22.2 No.14-05 | |
10x38 IEC | 32A aM,25A gG | IEC 60947-3 DC23A |
*Rating may be lower depending on installed fuse. Refer to fuse data sheet.
Accessories
Catalog Number | Description | Configuration | Signal Output | Minimum Circuit Voltage | Agency Approvals |
CCP-AUX | Auxiliary Contacts NO+NC for Switch Status | 1 per CCP | 5A/240Vac | - | Ul 98 Recogniaed and cURus 22.2 No. 4-04, IEC 60947-5-1 AC15 |
CCP-PLC-INC | Wired Remote Fuse Indication for PLC Applications | 1 per CCP | 24Vdc | 100Vac | UL 98 Recogniaed and cURus 22.2 No. 4-04 |
CCP-AUX
CCP-PLC-IND (Includes spade terminals)